Industrial Switchgear & Automation

PCC, MCC & PLC Automation Panel Engineering

Custom-built industrial electrical panels designed on EPLAN, manufactured in our facility, and tested to IEC 61439 standards. From a simple MCC starter panel to a fully integrated PLC SCADA control system — we make what your plant needs. Plus DG set sales, service, and electrical licensing work.

Call Us Now
What We Do

Custom Switchgear & Industrial Panel Engineering

We design on EPLAN and manufacture CPRI type-tested PCC, MCC, and PLC automation panels (up to 6300A busbar rating) using 100% Tier-1 switchgear for factories, solar plants, and substations.

PCC & MCC Panels (Up to 6300A Busbars)
Siemens & Allen-Bradley PLC SCADA
EPLAN Schematic Drawings & Wire Mapping
DG Set Sales, Synchronizing & CEIG Licensing
Vishwa Powertech Industrial Switchgear & Power Equipment Commissioning
Our Capabilities

Turnkey Industrial Panel & Automation Scope

CPRI type-tested PCC, MCC, PLC panels up to 6300A busbar rating with 100% Tier-1 switchgear components.

PCC Panels (Up to 6300A Busbars)

Main Power Control Centre panels rated up to 6300A with 65kA / 1 sec short-circuit withstand capacity, 99.9% ETP grade copper busbars, and Form 4b fully compartmentalized steel enclosures.

Motor Control Centre (MCC & VFD)

Fully compartmentalized MCC panels housing star-delta starters, soft starters, and VFD drives with withdrawable drawer units for rapid maintenance and minimal process downtime.

VCB, ACB & SF6 Switchgear

11kV/33kV vacuum circuit breaker panels and SF6 Ring Main Units (RMU) for factory receiving substations, equipped with microprocessor-based protection relays (Siemens/Schneider).

PLC & Industrial Automation

Turnkey PLC programming and SCADA integration (Siemens S7-1500, Allen-Bradley CompactLogix), HMI touchscreens, Profinet fieldbus wiring, and plant process automation.

EPLAN Electric P8 Blueprints

Comprehensive schematic drafting on EPLAN P8 and AutoCAD Electrical — multi-line wiring diagrams, terminal strip mapping, cross-referencing, and complete Bill of Materials (BOM).

DG Set Sales, Sync & CEIG Licensing

Diesel generator sales (15 kVA to 2000 kVA), auto-mains failure (AMF) panels, multi-DG synchronization panels, and statutory CEIG electrical inspector clearance.

Our Process

How We Build Your Panels

1

SLD & Load Schedule Review

You share your single-line diagram or load list. We review motor ratings, protection requirements, fault levels, and control philosophy.

2

EPLAN Design & Approval

Detailed EPLAN schematics created — power circuit, control circuit, wiring diagram, and terminal strip layout sent for your approval.

3

Manufacturing & FAT

CNC sheet metal fabrication, busbar bending, component mounting, wire ferrule marking, and Factory Acceptance Testing (FAT).

4

Delivery & Commissioning

Site installation, cable termination, interlocking check, PLC I/O checkout, and final Site Acceptance Testing (SAT).

Technical Specifications

PCC, MCC & Automation Panel Manufacturing Standards

Switchgear ratings, CPRI short-circuit withstand capabilities, and PLC/SCADA automation standards.

Panel Manufacturing & Automation Specifications
CPRI Type-Tested Design
Technical Parameter Engineering Specification Applicable Standard
Busbar Current Rating Up to 6300A High-Purity ETP Copper / Electrolytic Aluminium CPRI Tested (65kA for 1 sec)
Design & Enclosure Standard 2.0mm CRCA Sheet Metal, Powder Coated RAL 7035 (IP42 to IP65) IEC 61439-1/2 / IS 8623
Form of Separation Form 1 to Form 4b Fully Compartmentalized Withdrawable Drawers Form 4b Safety Isolation Code
Switchgear Components Tier-1 OEM Switchgear (Schneider Electric, Siemens, ABB, L&T) 100% Original Factory Equipment
PLC & SCADA Hardware Siemens SIMATIC S7-1500/1200, Allen-Bradley CompactLogix Profinet / Modbus TCP Protocols
Schematics & Blueprints EPLAN Electric P8 Multi-Line Schematics & Wire Tagging BOM IEC 81346 Standard
DG Set & AMF Panels 15 kVA to 2000 kVA DG Sync Panels with AMF Controllers CEIG / CPCB-IV+ Approved
Why Vishwa Powertech

Why Our Panels Stand Out

EPLAN schematic design, Tier-1 components, and CPRI type-tested reliability.

We Design Before We Build

Every panel starts with a formal EPLAN schematic — approved by you before manufacturing begins. Wire numbers, terminal strips, and tags are fully mapped.

Strictly Tier-1 Components Only

Schneider, Siemens, ABB, L&T. We never use cheap unbranded components. Every MCCB, contactor, relay, and meter comes with OEM test certificates.

CPRI Type-Tested Panel Designs

Our PCC and MCC designs are type-tested at CPRI laboratories for temperature rise, short-circuit withstand (65kA), and insulation coordination.

Turnkey Erection & CEIG Licensing

We don't drop panels at your gate and walk away. We install them, terminate cabling, commission automation, and secure CEIG electrical licensing.

6300A
Max Busbar Rating
65kA
Short Circuit Withstand
IEC
61439 Compliant
CPRI
Type-Tested Certified
Frequently Asked Questions

Panel & Automation FAQs

PCC (Power Control Centre) is the main incoming power distribution panel in a factory. It receives power from the transformer or grid, and distributes it to different sections of your plant through MCCB or ACB feeders. MCC (Motor Control Centre) sits downstream from the PCC and specifically controls individual motors — with starters, overload relays, VFDs, or soft starters for each motor feeder. Think of PCC as the trunk line and MCC as the branch lines to individual machines.
Absolutely. Most of our factory clients come to us with just a motor list or equipment schedule. Our electrical design team will prepare the complete single-line diagram, schematic drawing, and panel GA layout from scratch. We'll send you the EPLAN drawings for review before manufacturing begins. The design service is part of our standard scope — we don't charge extra for it.
Primarily Siemens S7-1500 and S7-1200 series — they're the most widely used in Indian industrial automation. We also work with Allen-Bradley CompactLogix for clients who prefer Rockwell Automation, and Delta DVP series for cost-sensitive applications. We handle the complete PLC programming, HMI configuration, fieldbus wiring, and SCADA server setup. If you have an existing PLC system and need modifications, we do that too.
Yes. We supply diesel generator sets from 15 kVA to 2000 kVA — Cummins, Kirloskar, and Mahindra Powerol are the brands we work with. We handle the complete installation — civil foundation, exhaust piping, fuel line, AMF (Auto Mains Failure) panel integration, and synchronization with your mains supply. For servicing, we offer Annual Maintenance Contracts covering oil changes, filter replacement, load bank testing, and emergency breakdown support.
CEIG stands for Chief Electrical Inspector to Government. Any electrical installation above a certain connected load (varies by state — typically 100 kW or 150 HP) needs to be inspected and approved by the CEIG office before you can legally operate it. This includes factories, solar plants, substations, and large commercial buildings. We handle the entire process — drawing preparation, application submission, inspection coordination, and approval certificate follow-up.
Typically 4 to 6 weeks from drawing approval to dispatch. This includes sheet metal fabrication (1 week), component procurement (1–2 weeks for standard items, longer for special-order components), assembly and wiring (1–2 weeks), and testing (2–3 days). For urgent requirements, we can compress this to 3 weeks if all components are available ex-stock. Complex PLC automation panels with SCADA integration may take 6–8 weeks due to programming and simulation testing.
Partner With Engineering Experts

Send Us Your SLD or Load Schedule

Share your single-line diagram, motor list, or equipment schedule. Our panel engineering team will send you a detailed factory-direct quotation within 24 working hours.

Chat on WhatsApp